As a firearm owner, one of the most horrendous sites is rust showing up on and inside your gun barrel. This can hamper the functionality of your prized weapon—also, its aesthetic appeal damages to a huge extent. As a result, the gun becomes almost useless.
But, the new guns are anodized with a protective coat?
Yes, but that coating doesn’t last forever. After some period of time, rusts can be seen.
Rust can show up on your guns’ barrels and metal parts if it remains exposed to the atmosphere humidity for too long. However, experts say that this process becomes more rampant in hot and humid climatic conditions. So, it becomes essential to do a routine check on your gun parts, especially if you live in a hot and humid region. This process happens prior to bluing the gun.
Effective ways to remove rust from Gun Barrel
Through this article, I’ll be showing you some easy steps in which you can keep that layer of rust away from your guns. Professional gunsmiths have used these methods for ages. This article aims to make that information available to you too.
Applying Gun Greasing Oil
Oiling is the best and the most effortless remedy to keep your gun away from iron oxide. This method is perfect for the gun having deep and heavy rust. Bisley gun oil is the most effective oil, which most people use.
Here is the procedure which should be followed to get the most effective result:
Firstly, apply a medium quantity of oil and let the oil rest for some time so that the grip of the rust gets loosen, and it becomes easy to remove rust. Initially, you’ll see a rusty liquid coming out from the surface while wiping. It’s a mixture of rust and oil. Apply oil as long as you’ll see rust in the liquid outcome.
Take a piece of cotton cloth and start cleaning the iron oxide. Continue rubbing it until the deep and heavy rust gets removed.
Once the colour effect of the oil starts to change its color from clear to rusty, then you can easily determine that it remove rust.
Using Steel Wool
Having proper knowledge about the material is very important for the effective cleaning of the gun, for rust removal in the least amount of time, apply 2-3 drops of any oil and start rubbing it with steel wool.
Don’t apply too much pressure on the steel wool pad because doing so will ruin the finishing of the gun. The steel wool pad will easily help in removing complete rust within a few minutes.
Rust removal in this method is most effective for the gun but requires some scientific treatment. This method is productive for guns made of copper, aluminum, or brass materials. However, this method requires a few additional supplies.
Take a plastic bowl, spoon full of baking soda, steel rod, and changer of any battery.
Mix the baking soda in water for the generation of the electrolyte and add a steel rod to it.
This will change the rod to the anode, and the solution will become cathode.
Once the arrangements are over, take a charger and connect the cathode end to the rusted area of the gun and the anode to the rod.
Once you start witnessing bubbles, keep it aside for almost there five hours. Take the gun and use a cotton cloth to clean the rust. The iron oxide accumulated will easily get removed.
Brushes of Nylon and Bronze
These tools are long-lasting and can be used for ages. Place the gun on a plain surface, hold it from one end and then start rubbing the brush on its surface in a rotation movement. Continue rubbing it until you have removed the rust. You can also use a stainless steel brush. Not to mention, less abrasive brushes than your gun are good to use.
This method is quite expensive but is highly effective. There is an ample number of manufacturers of gun pipe cleaner.
The only thing that you need to do is to go and purchase that cleaner and rub it on the surface in rotatory movement. The rust will automatically get removed easily.
Lemon and Vinegar
It is the best way to remove rust by yourself right at your home. Also, this is the most cost-efficient method, as well. This is because lemon and vinegar are two materials that are available in almost all households.
Take a container and prepare a solution with the help of vinegar and lemon; for best results, add a pinch of salt to it. Place the affected gun parts in that mixture and leave it apart for some hours. Then wipe off the rust with the help of a cloth or napkin.
This is the most recommended cleaner by all the manufacturers. It is preferable because of its properties like not letting the moisture settle and prevent the rust from accumulating. However, a major setback is that it consumes a lot of time.
Spray the solution on the surface of the gun and let it rest for about 24 hours. Once the suggested time period is over, spray the solution on the gun parts once again and clean it out with the help of the napkin. It involves less physical work, and it’s the only drawback is the time it takes for effective cleaning.
Dremel attached gun
Tensed about removing rust off from your old guns? Giving your gun exposure in moisture can spoil the functioning by letting the rust getting accumulated, which even spoils the design.
Dremel is a rotator tool that has small rubber wheels attached to it. They are best preferred for removing even the oldest rust completely without hard labor. Simply put your gun in the machine, align the rubber wheels on the metal parts, and then leave it up to the Dremel’s even stroked action to get a gun that shines as good as new.
These were some of the most efficient ways to get the annoying layer of rust away from your gun. As can be seen, you can do it all by yourself from the comforts of your home as well as get it done with the help of complex machinery.
You should always take the utmost care of your prized gun and take care of its servicing from time to time to keep it safe from any harmful rusting. Always keep the gun as dry as possible. And you now know what you need to do the next time you find yourself in such a situation. Cheers!